You are here:>>DROK 2in1 Battery Monitor
DROK 2in1 Battery Monitor 2017-07-31T17:09:38+00:00

Home › Forums › Advice › DROK 2in1 Battery Monitor

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • kevin
    July 31, 2017 at 5:09 pm
    Post count: 0
    #20030 Reply |

    I purchased a DROK 2in1 Battery Monitor Digital Voltmeter Tester for Electromobile, Waterproof LED Capacity Tester for 12V/24V/36V/48V Lead-acid Cell Lithium Battery, DC6-120V Volts Meter Panel.
    Looking for an example of how you would configure it for golf Cart (48v = 6 x 8v batteries) …thanks in advance

    Drok
    Keymaster
    August 1, 2017 at 8:18 am
    Post count: 2971
    #20072 Reply |

    Hello kevin,
    Thanks for writing in.
    For 48V lead-acid battery, please select 2V on “2-b” setting;then select 24 on “3-c”
    For more details about setting, please refer to the instruction here.
    https://images-na.ssl-images-amazon.com/images/I/81U8+AycbzL.pdf
    Best regards.

    kevin
    August 3, 2017 at 10:03 pm
    Post count: 0
    #20190 Reply |

    Thanks for the response. So I modified the settings as requested. 2v x 24 = 48v
    The LCD results are 55% and the battery indicator is 1/2 full. Why would it not read 100% when set to 1-U “48v”, 2-b “2v”, 3c “24”? I tested all batteries in line where I have the Battery Monitor connected and it reads 50v at full charge?
    Thank you.

    Drok
    Keymaster
    August 4, 2017 at 9:41 am
    Post count: 2971
    #20204 Reply |

    Hello kevin,
    55% means it is still not be charged full. And When it is fully charged, voltage will be around 53V.
    Best regards.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: DROK 2in1 Battery Monitor
Your information: