You are here:>>New at audio equipment
New at audio equipment 2018-01-03T00:21:42+00:00

Home › Forums › Advice › New at audio equipment

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • Alex
    January 3, 2018 at 12:21 am
    Post count: 0
    #28545 Reply |

    So I’m a bit new at wiring audio equipment,  by that I mean that I have next to no idea what I’m doing. I got an Audio-Technica AT-LP60 turntable that has a pre-amp built in, that has output for both phono and aux,  a pair of Micca MB42 bookshelf speakers, and a drok audio TPA3116 mini power amp and I’m not sure what DC input I’ll need, if the 14AWG wires I have are enough, or if I’m on he right track in the first place.

    Alex
    January 3, 2018 at 12:30 am
    Post count: 0
    #28546 Reply |

    phono ouput is 2.5 mV nominal at 1 kHz, LINE (AUX) is 150 mV nominal at 1 kHz.

    MB42 power handling : 75 watts (each)) Impedance 4-8 Ohms

     

    Drok
    Keymaster
    January 5, 2018 at 7:29 am
    Post count: 2971
    #28617 Reply |

    Hello Alex,
    Thanks for writing in.
    Is this the amplifier you mean?
    200138
    Its power supply can be DC 9-25V (Current is above 3A, if you would like a higher power, 19-24V/above 4A is more suitable)
    Best regards.

    Alex
    January 5, 2018 at 3:14 pm
    Post count: 0
    #28628 Reply |

    That might be the board, this is what I ordered.

    Drok
    Keymaster
    January 7, 2018 at 7:34 am
    Post count: 2971
    #28662 Reply |

    HellO,
    For this item, we suggest power supply can be 12-24V. You need to think about if the power supply can offer enough power to your speaker. For some small speaker, 12V/5A power supply should be suitable.
    Best regards.

    • This reply was modified 6 years, 8 months ago by  Drok.
  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: New at audio equipment
Your information: