multimeter SKU 200400, can't connect measurement board with display by Wifi – Drok.Blog

HomePanel Meter Support

multimeter SKU 200400, can't connect measurement board with display by Wifi 2021-06-10T21:54:44+00:00

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
Ernesto Bertrand
June 10, 2021 at 9:54 pm

Post count: 0

#73313 Reply |

I have an SKU 200400 multimeter, but I can’t make it works properly. The measurement board ad the display don’t connect by Wifi, no matter the address I assign; neither I can see the addresses parameters.

I couldn’t find a user manual for this multimeter, I have one of the SKU 200193, but as the wiring is different, I guess neither the manual is the same for both of them

Can you tell me where to find a manual for de 200400, or at least, how to assign the address.

Best regards

Drok
Keymaster

June 11, 2021 at 11:21 am

Post count: 2971

#73362 Reply |

Hello Ernesto Bertrand，

In general, the measuring module is A01. If you don’t change it, the communication address should be always A01.

Please move cursor to ADR and short press OK to enter setup, then press up or down button to choose address A01. If it is not A01, you can try the next one unitl it is connected. At last , please hold the OK button to save setting.

Any more questions, please kindly contact us.

Best regards.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)