You are here:>>DROK Battery Monitor #2001710003 with 3 lithium batteries how to program
DROK Battery Monitor #2001710003 with 3 lithium batteries how to program 2021-11-03T03:18:23+00:00

Home › Forums › Any Other Products › DROK Battery Monitor #2001710003 with 3 lithium batteries how to program

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • fred
    November 3, 2021 at 3:18 am
    Post count: 0
    #83797 Reply |

    I purchased a DROK 10-100v Battery Monitor #2001710003 from Amazon and I need instructions on how to correctly program it for 3 Lithium LiFePO4 12v 60Ah batteries hooked in series.

    At full charge the monitor reads 39.9v and 100% capacity.  After discharging the batteries for a period of time the monitor reads 39.4 volts, but still shows that there is 100% capacity.  How can the batteries be at 100% capacity after they have been discharged for a period of time?

    How do you program the DROK 10-100v Battery Monitor #2001710003 to accurately measure the battery capacity of the 3 Lithium LiFePO4 12v 60Ah batteries hooked in series?

    Thank you in advance for your help!

     

    Drok
    Keymaster
    November 3, 2021 at 9:36 am
    Post count: 2971
    #83807 Reply |

    Hello fred,

    Please refer to  rated battery voltage instead of battery cell quantity.  In this program , one cell of lithium iron phosphate  is 3.2v, assume your battery is 12v,  you can select “F4″(3.2V*4) in menu”1–“.

    If  there is no suitable battery specification in menu 1, please program menu “3–“, custom setting.

    For more deails, please refer to instruction, https://m.media-amazon.com/images/I/911LJfacaVL.pdf

    Best regards,

    DROK

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: DROK Battery Monitor #2001710003 with 3 lithium batteries how to program
Your information: