You are here:>>12v dc to dc converter for pos. grd to neg. grd
12v dc to dc converter for pos. grd to neg. grd 2017-04-17T17:57:35+00:00

Home Forums Advice 12v dc to dc converter for pos. grd to neg. grd

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • George Neisz
    Post count: 0

    do you still have such a unit 122412L or a updated type? I would like to purchase such a item for my boat-car so I can install a newer style radio w/ a bluetooth builtin. they are all neg. grd radios, & my old am radio had switchable plugs in the side of it for 6-12v & neg to pos grd. Made by montgomery wards back in the 60’s. thank you in advance if you can help me!!

    Drok
    Keymaster
    Post count: 2971

    Hello George Neisz,
    Thank you for writing in.
    We are sorry we can’t ensure the item you mention.
    Would you please tell us the ASIN or send us the link of item?
    And pleas tell us more detail about your requirement.
    What is the input voltage/current? the output voltage you need and etc.
    Best regards,
    DROK

    George Neisz
    Post count: 0

    in dec. 2016,there was a Drok 122412L converter good for 12 amps & 288 watts output.
    it was advertised on amazon. the label on back showed RBBY & +–+ respectively. also I saw a ebay FULree 122412 listed in this arcticle by MGAguru.com I wish to run a newer radio w/ neg. grd in a pos. grd system. this am/fm bluetooth radio has a 10 amp fuse in the chassis & says the usb port can draw 2.5 amps if using it to charge your phone. so any ideas on how to make this work would be very greatfull!! my father-in-law said they used to put the old radios in a bakelite case to isolate them from the chassis to sw pos. to neg. grds. the old am radio that is now in the car is a monkey wards 60’s type w/ to pin plugs on the side to change it 6v to 12v’s & – to + grds.

    Drok
    Keymaster
    Post count: 2971

    Hello George Neisz,
    As we have many kinds of products,we are sorry it is really hard to ensure the item without link,ASIN(Amazon Standard Identification Number) or part number.
    Is it possible to find out the purchase history of this item?
    Sincerely beg for your forgiveness and hope you can understand.
    Best regards.

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: 12v dc to dc converter for pos. grd to neg. grd
Your information: