You are here:>>150W DC Boost Converter 6-16 volt short pin location?
150W DC Boost Converter 6-16 volt short pin location? 2015-11-19T22:54:39+00:00

Home Forums Voltage Regulator Support 150W DC Boost Converter 6-16 volt short pin location?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • L.J. Rafford
    Post count: 0

    The 10-32v and 8-16v are marked on the back of the board but they are next to two spots that look like they could be shorted. I am not shore witch ones to short? also I assume
    the unit is default at 10-32v? Please help with a photo or a manual

    Thanks

    DROK® 150W DC Boost Converter

    Drok
    Keymaster
    Post count: 2971

    Hello, sorry for the delay. As the below image, the two spots next to “10-32v” “8-16v” mark on yellow circle, just connect the two spots to short circuit.
    090438_short-circuit

    And the unit is default at 10-32V.

    Any other questions, don’t hesitate to write back to us.

    Best regards,
    DROK

    L.J. Rafford
    Post count: 0

    Thanks for the help. But there is a circuit in the way in the yellow circle area.
    do I short the pin to the right of the yellow circle where there is nothing there?
    to set it for 8-16v? just want to be clear I don’t want to let the smoke monster out.
    lol. It looks like this at 32v 0=0 0 so make it look like this 0=0=0 for 16v?

    Drok
    Keymaster
    Post count: 2971

    Dear friend,
    Thanks for your reply.
    10-32v is 0=0 0 8-16v is 0 0=0
    Hope this will help you.
    Best regards

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: 150W DC Boost Converter 6-16 volt short pin location?
Your information: