You are here:>>4-20mA Generator setup
4-20mA Generator setup 2018-06-28T20:00:37+00:00

Home › Forums › Any Other Products › 4-20mA Generator setup

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Jonathan Gamble
    June 28, 2018 at 8:00 pm
    Post count: 0
    #29926 Reply |

    I have purchased a 4-20 mA Generator p/n 300425.  I have it set up and working, but the display and the output can go down to 0 mA. Is it possible to set the minimum output (and display) to not go below 4 mA?  I see two buttons on the PCB, and there is some discussion in the forum about setup instructions, but I couldn’t find anything specifically for this model.

    Thank you
    Jonathan

    Drok
    Keymaster
    June 29, 2018 at 10:13 am
    Post count: 2971
    #29933 Reply |

    Hello Jonathan Gamble,

    There is no way to limit the minimum output.

    Here is a pdf for your reference. 300425

    Best regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: 4-20mA Generator setup
Your information: