60W Buck/Boost Converter Current Limiting

[Colt4547 September 18, 2016 at 4:35 am Post count: 0]

#9139 Reply |

Hello I’ve recently purchased B00JKG57T4 from the Amazon US site. The module seems to regulate voltage fine but the current control does not properly respond to adjustment. The minimum current out of the module seems to be 4 amps. I am testing this with a 2 ohm resistor connected to the output. Of course when the voltage is adjusted below 12 volts then the current drops but any output current under 4 amps is not possible. I wanted to contact you before I return the module.

Thanks.

[DrokKeymaster September 19, 2016 at 1:53 am Post count: 2971]

#9173 Reply |

Hello Colt4547,
Thank you for writing in.
Could you please tell us more details of your operation, such as the input voltage/current, the wiring?
If yo can, we sincerely hope that you can send us some images to let us check the problem details.
You can send this information to us by email (service at droking dot com).
Looking forward to hearing from you.
Best regards

[Colt4547 September 19, 2016 at 3:05 am Post count: 0]

#9176 Reply |

Thank you!

I’ll get you a more detailed report of the exact performance asap. Unfortunately, I am traveling, I will not be near my equipment for about a week.

Thank for the reply.

[DrokKeymaster September 19, 2016 at 3:32 am Post count: 2971]

#9180 Reply |

Hello Colt4547,
You’re welcome.
You can send the information to us after finishing your trip.
Have a nice time!
Best regards

[Author]

Posts