You are here:>>After fully charged the Battery Capacity is 220AH not 20 AH
After fully charged the Battery Capacity is 220AH not 20 AH 2021-11-15T15:21:37+00:00

Home › Forums › Panel Meter Support › After fully charged the Battery Capacity is 220AH not 20 AH

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Noel Ong
    November 15, 2021 at 3:21 pm
    Post count: 0
    #84104 Reply |

    okay I bought this product

     

    I am getting 220AH in the upper right value instead of 20AH, so battery capacity is wrong

    As per instruction in manual.  This is what I followed I set the paramaters

    AH 020.0
    FU 013.6 – full
    HU 013.7
    LU 012.9    battery at 20%
    HA 020.0

    I then used a battery charger to fully charge the battery.  At full, I went and change the FU value which is 13.7.  It went to main display and value is now 220AH.

    How do I correct this?  Thanks

     

     

     

    Drok
    Keymaster
    November 16, 2021 at 7:22 am
    Post count: 2971
    #84149 Reply |

    Hello Noel Ong,

    To check what wrong it is, would you like to show operation details  by video so that we can find out the cause?

    If you need to revise AH and FU value, please do that before  charging battery.

    Best regards.

     

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: After fully charged the Battery Capacity is 220AH not 20 AH
Your information: