buck converter

[steve October 13, 2021 at 6:54 pm Post count: 0]

#82665 Reply |

i  calibrated and powered the module per instructions , was able to get voltage bucked down to 5V from 25V input using the voltage adjuster knob,  however im not able to do the same with current Adj. any reason why ?

 

[DrokKeymaster October 15, 2021 at 10:26 am Post count: 2971]

#82819 Reply |

Hello,

We can’t confirm which buck converter it is,  but for all of converters, they can only set a limit for current so that actual output is not over that level.

Actual output current mainly depends on your load. If load just draw 1A, converter can’t let it draw 2A.

Best regards,

DROK

[Author]

Posts