You are here:>>can't be turned down to 12vdc
can't be turned down to 12vdc 2015-12-11T09:59:23+00:00

Home › Forums › Panel Meter Support › can't be turned down to 12vdc

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • bryan
    December 5, 2015 at 8:09 pm
    Post count: 0
    #2596

    voltage output regulator will not go down below 19vdc, but it will allow the voltage to go up to 93vdc. will the default setting not allow the unit to drop below 19vdc?

    Drok
    Keymaster
    December 6, 2015 at 1:25 am
    Post count: 2971
    #2598

    Hi, please tell us which product do you want to know. Maybe you can give us the product link or your order number. And please provide more details about your using environment and wiring connections. Looking forward to your reply. Regards!

    bryan
    December 6, 2015 at 11:55 am
    Post count: 0
    #2602

    I’m using a small solar panel set up. Its 135 watt 21 volt 8.52 amps. I purchase the 600 watt 12-60 volt input 12-80 volt out put. https://www.amazon.com/gp/aw/d/B00E8D7XYG/ref=mp_s_a_1_1?qid=1449402663&sr=8-1&pi=SL75_QL70&keywords=drok+600w

    Drok
    Keymaster
    December 7, 2015 at 8:36 am
    Post count: 2971
    #2604

    Hello again,
    Do you mean that your input is 135w 21v 8.52a? Please note that this is step up voltage regulator. so the default setting not allow the unit to drop below 19v DC.
    Any other questions, don’t hesitate to write back to us.

    Best regards,
    DROK

    bryan
    December 7, 2015 at 7:28 pm
    Post count: 0
    #2612

    what drok product would you recommend if i wanted to power a 1500 watt dc to ac inverter running only on solar panels. the minimum input of the inverter being a constant 12vdc. the output of the voltage regulator would have to be a minimum of 12vdc and up. with the input being to handle 17.4 to 21.6 vdc.

    Drok
    Keymaster
    December 9, 2015 at 4:06 am
    Post count: 2971
    #2624

    Sorry that we don’t have such product that can meet your requirements.

    Thanks for your understanding.
    Best regards,
    DROK

    bryan
    December 9, 2015 at 6:05 am
    Post count: 0
    #2625

    thank you anyway

    Drok
    Keymaster
    December 9, 2015 at 7:27 am
    Post count: 2971
    #2626

    Dear bryan,

    Sorry to be causing so much troubles to you. I made a mistake. （T﹏T）
    Our technicians said this 8A NC Step Down Voltage Regulator can power for your inverter.

    Sorry again!! then any other questions, feel free to contact us.

    Best regards,
    DROK

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
The topic ‘can't be turned down to 12vdc’ is closed to new replies.