Correct setup/programming of SKU 2001710003 10-100V Digital Battery Capacity te

[Brent Meeker December 27, 2021 at 6:53 am Post count: 0]

#86504 Reply |

I have an SKU:2001712003.   I can’t get the battery amp-hour specification to setup correctly.  I have 12v lead acid, 3ah battery.  I go thru the “Button Instructions” 4. Setting parameters.  I set AH003.0 and FU012.7 and leave the other three LU, HU, HA all zero.  I wait until the display goes back to normal.  The display then shows the battery capacity as empty and the remaining capacity as 24.6.  I’ve gone thru it a couple of times setting AH003.0, but it always comes back 24.6???

[DrokKeymaster December 27, 2021 at 10:05 am Post count: 2971]

#86516 Reply |

Hello,

Please kindly notice you need to fully charge battery again after setting. And the charging current must flow through the current sensor, or it can’t show correct battery capacity.

[José July 29, 2022 at 4:30 pm Post count: 0]

#98372 Reply |

This reply has been marked as private.

[DrokKeymaster August 3, 2022 at 8:32 am Post count: 2971]

#98612 Reply |

Hello José,

Are you talking about the #2001710003? Could you please tell us more details about your problem?

[Mike N. September 8, 2022 at 4:04 pm Post count: 0]

#100884 Reply |

I have a dual 48v Lithium battery setup in my golf cart. I set mine to L-2 under menu #1. The meter shows the battery at 100% and does not drop even after using the cart. What did I do wrong?

[DrokKeymaster September 15, 2022 at 2:52 am Post count: 2971]

#101382 Reply |

Hello Mike N.

Are you talking about the 2001710003? Please notice  one litium battery voltage is  4.2v in this program, then L2 means  4.2v*2=8.4v instead of 48v.

Best regards.

DROK

[Enoch June 19, 2023 at 1:45 pm Post count: 0]

#116626 Reply |

This reply has been marked as private.

[Renato Abu Hana August 30, 2023 at 5:52 pm Post count: 0]

#116959 Reply |

Hi I have a 48v Golf Cart. Just  bought 6set of battery Trojan 8V.

The monitor is not accurate and I am not sure how to set it up.

In the first menu:

1) I set up 48V

3) not sure which voltage range should I use. The guy that sold me the batteries said low: 48v and high 56,4v. Is that correct?

 

although I tried that. The battery only show  up to 75%.

can you guys help to to configure it ?

thank you

[Tom June 13, 2024 at 8:57 pm Post count: 0]

#120245 Reply |

how do I set up for a  <b>56.7V</b> Li-Ion battery?

[Logan June 19, 2024 at 2:47 am Post count: 0]

#120318 Reply |

I have the 48v battery meter setup on my lifepo4 lithium battery on my golf cart and it is always showing that the battery is at 100%. Am I missing something in the setup of the meter? I have misplaced my setup guide that came with the meter

[Author]

Posts