D85 Digital Meter

[DrokKeymaster October 27, 2016 at 2:23 am Post count: 2971]

#10059 Reply |

Hello Chuck,
Thank you for your reply.
We have checked your link that this product is sold by roroauctions, which is not the seller of DROK (kuuco,iawoo,jenny).
So we are not sure the technical characteristics and the instruction of this product.
If for the product of DROK, the measured range of the meter is 0-10A, which is no need to add a shunt.
Here the measured range is not the real measured current of the load, but the technical specified measured range of the meter.
However, since it is not the product of our company and we are not sure the characteristics of it, this information is for reference.
Hope this can help you.
Best regards

[Chuck October 29, 2016 at 5:17 pm Post count: 0]

#10124 Reply |

All hooked up and working fine for what I need, no shunt needed. A little disappointed though in it’s accuracy. My power is outputting 16.5 volts … the display is reporting 18v … o.O

[DrokKeymaster October 31, 2016 at 2:39 am Post count: 2971]

#10138 Reply |

Hello Chuck,
We are glad that your problem has been solved.
Since this product is not sold by our company, we are not sure the technical parameters of it.
So sorry that we cannot provide any suggestion to.
Hope you can understand.
Best regards

[Chuck November 12, 2016 at 8:02 pm Post count: 0]

#10544 Reply |

I understand it’s not sold by you, but it has your name on it … so I assume it’s your product. Therefore you should know the product, regardless of who sells it. And if not, then maybe it’s a counterfeit product using your name. In which case, you might want to find out who’s pushing a fake DROK product. Because honestly, this thing works, but is not accurate. And leaves me looking at other products instead.

[DrokKeymaster November 14, 2016 at 3:49 am Post count: 2971]

#10563 Reply |

Hello Chuck,
Thank you for your valuable suggestion.
This is the counterfeit product using the name of our company.
We will take measures to warn the the sellers who use our name and stop them doing it again.
Great thanks for bringing this issue to our attention.
So sorry for the inconvenience caused on you.
Best regards

[David Higley January 19, 2017 at 6:45 pm Post count: 0]

#11863 Reply |

I’ve just received from Amazon a Drok D85 AC ammeter, single display, 0-19.9 amps. I want to use it to measure output current from a variable transformer (120VAC input). Can you tell me how to wire it, or provide a wiring diagram? Thank you.

[DrokKeymaster January 23, 2017 at 9:46 am Post count: 2971]

#12057 Reply |

Hello David Higley,
Thank you for writing in.
Could you please send us the link of product so that we can ensure which product you mention?
Please don’t worry, we find solution for you at that time.
Best regards.

[David Higley January 23, 2017 at 12:57 pm Post count: 0]

#12065 Reply |

I already received an answer from an Amazon customer, but here’s a link for the product: https://www.amazon.com/Digital-AC19-99A-Ammeter-Amperemeter-Backlight/dp/B014EN0QF2/ref=cm_cd_qf_qfpq_dp_t
Thank you

[Chris S June 14, 2017 at 12:03 pm Post count: 0]

#18618 Reply |

I just puchased a DROK D85-3051 DC Digital Voltage & Current Meter from Amazon for my Solar Power system. This system is a max of 20v and 5a system. I have wired it up with the provided shunt installed, as per the 1 page diagram in the package, as we have a lower than 40v system here and the load has no discernbable shuint installed.

I thought that amperage was measuring high, so I did some invesitgation.

I used by portable digital mutimeter to measure the DC voltage and amperage. The voltage was correct, but the amperage was out by an order of magnitude. The D85 was reading 7 amps, while my multimeter was reading 0.007 amps. Can you explain the differential. Does the D85 revert to showing milliampos rather than amps when the amperage is low?

The product I purchased was:
https://www.amazon.co.uk/gp/product/B0155WEP8U/

Thanks for yoru help.

[DrokKeymaster June 16, 2017 at 8:22 am Post count: 2971]

#18644 Reply |

Hello Chris S,
Thanks for writing in.
To check what the details, is it convenienct for you to take a testing video to show wiring and operation?
You can send video to service#droking dot com ( please replace # with @)
And please try to tell us more details about othere parameters.For example, power supply, load and etc.
With your help, we can find solution quickly.
Best regards.

[Author]

Posts