I have DC Buck converter 200593.

I have a meanwelll 24V 10 Amp power suply as input connected to the converter.

I want to use the converter in Cc mode. Problem is it jsut wond give more than 1.47 amps as output.

When setup for CC mode at .5 amps, works well but the more current I adjsut, the more inpuit voltage is requried and when it reaches 24V then mode changes to CV automatically. Idelaly I would want the converter to output 2Amps, my circuit is around 6.5 Ohms, so, it shoudl requrie only 13 V. What I’m I missing here?

Converter is not tripping or anything similar.