description explanation

[Muhammad Asif August 26, 2016 at 7:59 am Post count: 0]

#7268 Reply |

Thanks
It means that for voltage calibration I have to provide 50 volt to the meter (because measuring range 100v)
and for current calibration 50 Ampere ( measuring range 100 A)
Am I right?

[DrokKeymaster August 29, 2016 at 2:23 am Post count: 2971]

#7471 Reply |

Hello,
You’re welcome.
When you calibrate the current/voltage, it is recommended that the measured value is half of the measuring range, which can reduce error.
The measured value is the value of the load (device) which need to be measured, but not the value of the power supply for the meter.
Hope this can help you.
Best regards

[Muhammad Asif August 29, 2016 at 9:50 am Post count: 0]

#7499 Reply |

Dear friend.
I am also telling about the voltage and current for the load, not for the power supply of the meter.
I am providing 6v dc for the power supply of the meter.now checking 50v dc of the load and 50A of the load for voltage and current calibration respectively.
Now am I right?

[DrokKeymaster August 29, 2016 at 9:58 am Post count: 2971]

#7502 Reply |

Hello Muhammad,
Sorry for misunderstanding your meaning.
Yes, it is right.
Best regards

[Muhammad Asif August 30, 2016 at 5:03 am Post count: 0]

#7555 Reply |

Thanks dear friend

[DrokKeymaster August 31, 2016 at 1:42 am Post count: 2971]

#7616 Reply |

Hello Muhammad,
You’re welcome.
We are so glad that it is helpful to you.
Have a nice day!
Best regards

[Author]

Posts