Dork VAC9010H All Calibration Settings Including menu/save digits.

[Kumar December 25, 2020 at 10:54 pm Post count: 0]

#55881 Reply |

HI … THE BATTERY CAPACITY ITS OKAYHH IF DISCHARGING ….AFTER CHARGER CONNECTED ITS GO STRAIGHT TO 100% IN A SECOND…WHY THIS PROBLEM…if I HAVE 50% BATTERY I SET TO 100AH OAH..MY BATTERY 12V 100AH …AFTER CONNECT POWER SUPPLY TO CHARGE BATTERY ITS GO STRAIGHT TO 100% …PLS ANY SUGGESTION

[Kumar December 25, 2020 at 10:56 pm Post count: 0]

#55882 Reply |

IM USING VAC9010H ONE …100A

[DrokKeymaster December 28, 2020 at 3:48 am Post count: 2971]

#56063 Reply |

Hello Kumar,

Would you like to show us th displayed parameters when charging battery?

You can share picture here or send it to service@droking.com

Best regards,

DROK

[John Watkins October 26, 2021 at 11:42 am Post count: 0]

#83558 Reply |

Hi,

I tried to reset AH & WH totals on my vac9010. Somehow the meter got currupted and the current was no longer showing. I worked through the calibration procedure and all is well. I cannot reset the totals and don’t want to repeat the same mistake. Is there an easy straight forward way of doing this?

 

Kind regards

 

John.

[DrokKeymaster October 27, 2021 at 7:51 am Post count: 2971]

#83623 Reply |

Hello John Watkins,

Do you mean an easy way to calibrate current or reset AH? There are no other ways to calibrate current and voltage.

If you want to reset AH, please move the yellow cursor to “LOP”, once the yellow cursor  is invsible,just short press button OK , then the time will be cleared, the AH value will be zeroed or filled.

After powering off, WH will be cleared automatically.

Best regards.

[Author]

Posts