DROK DC 12V Digital Timer Relay Board, Automotive 1500W Relay Module

[Awills March 23, 2017 at 2:48 pm Post count: 0]

#14064 Reply |

Hi,

I’m in need of the wiring diagram for this recently purchased item.

Thank you.

[DrokKeymaster March 24, 2017 at 10:08 am Post count: 2971]

#14081 Reply |

Hello Awills,
Thank you for writing in.
We are sorry for inconvenience caused you.
Is this item you mention?
https://www.amazon.com/DROK-Digital-Automotive-Display-Support/dp/B01MZ8DIOM/ref=sr_1_1?ie=UTF8&qid=1490349271&sr=8-1&keywords=DROK+DC+12V+Digital+Timer+Relay+Board%2C+Automotive+1500W+Relay+Module

If yes, here is an instruction for your reference.
300455-300456
For more questions, please feel free to contact us.
Best regards.

[Awills March 24, 2017 at 12:53 pm Post count: 0]

#14086 Reply |

Thank you for the reply. Do you also have a wiring diagram for this item?

Thank you.

[JOHN November 3, 2017 at 8:39 pm Post count: 0]

#24281 Reply |

Hi…I just posted this question, but maybe under wrong item.  I just received this timer and setting up program.  I have the timer counting down 10 seconds, then powering S0 and S1 for 20 seconds, then cycling through the sequence.  What voltage should I expect on S0 and S1 when energized?  thanks

[JOHN November 3, 2017 at 8:50 pm Post count: 0]

#24282 Reply |

Or…is S0 and S1 just used to open/close a connection?

[JOHN November 3, 2017 at 11:38 pm Post count: 0]

#24283 Reply |

Figured out what’s going on.  Working great!

[DrokKeymaster November 5, 2017 at 3:51 am Post count: 2971]

#24382 Reply |

Hello JOHN,
Thanks for writing in.
We are sorry we can’t reply to you on time. It’s glad you can figure out finally.
For any more questions, please let us know.
Best regards.

[richard November 23, 2017 at 8:42 pm Post count: 0]

#25270 Reply |

Hi John,

Can you tell me what you figured out pls? Got the controller and managed to set up the timing but not sure what s1 and s0 do yet…thought theyd be the output voltage but not getting anything on the multimeter . . . Hoping you can help! Thanks, Richard

[DrokKeymaster November 24, 2017 at 7:54 am Post count: 2971]

#25281 Reply |

Hi richard,
Thanks for writing in.
Would you please let us know Which item you buy? we are not sure if it is the same to John’s. If you can, please kindly offer a product link or ASIN number.
Best regards.

[Eric Frey December 15, 2017 at 11:12 pm Post count: 0]

#26268 Reply |

hello,

recently purchased the <span id=”productTitle”>12V Digital Timer Relay Board, (https://www.amazon.ca/gp/product/B01MZ8DIOM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1) </span>

I saw the instructions above on the actual use of the timer, although i cannot seem to connect it properly. I need a wiring diagram? there should be instructions when these items are sent out, I have wasted enough time searching and trying and being unsuccessful and frustrated.

 

[DrokKeymaster December 17, 2017 at 8:28 am Post count: 2971]

#27693 Reply |

Hello Eric Frey，
We are sorry for inconvenience caused on you.
Did you hook it up like the following diagram?

300456
Best regards.

[Eugene De Rozario January 9, 2018 at 6:41 am Post count: 0]

#28791 Reply |

If your load uses 12V as well, you can actually use one source of 12V to be shared and it’s very easily done. Using 1 source eases the project a lot. I designed mine on 1 common 12V and saves a lot of trouble (and costs). S0 and S1 are nothing more than continuity or breaks in your circuit (Normally Open or Normally Closed, according to how you want the relay to activate with reference to the time as per P1 – 1 through 5.

[DrokKeymaster January 9, 2018 at 9:59 am Post count: 2971]

#28807 Reply |

Hello Eugene De Rozario，
Thanks for sharing your experience here.
Best regards.

[Author]

Posts