Drok ltc 1871

[Dan W July 8, 2015 at 1:13 pm Post count: 0]

#1569 Reply |

Can this be used on a 6v pos grnd system? It will be isolated from the chassis.

[DrokKeymaster July 9, 2015 at 8:21 am Post count: 2971]

#1571 Reply |

dear friend

ltc 1871 input/output is common ground. so it should can work with your 6v pos ground system.

best regards

• This reply was modified 9 years, 6 months ago by  Drok.

[John Sibilio July 15, 2015 at 10:51 pm Post count: 0]

#1588 Reply |

hello,

it seem the temp sensor has an issue going below 28C for the high.

i building something for a turtle tank 28c is to too high for the temp

the temp of the turtle need to be around 22.5 c for the low and 24.5c for the high

can you please assist!

Regards,

John Sibilio

[DrokKeymaster July 16, 2015 at 6:56 am Post count: 2971]

#1589 Reply |

hi, John

maybe this thermostat can help you.

best regards

[Ron January 11, 2016 at 2:14 am Post count: 0]

#2896 Reply |

Hi maybe i don’t under stand fully how it works.
But let me try to explain.
I’m connecting a 5v arduino to ltc 1871 5v to 12v step up.
When I don’t connect to the output. The led lights up and says its 4.9.
But as soon as I connect to the output an electromagnet that requires 12v.
It seems to stop working until I remove the load from the output.

I’m confused

[Author]

Posts