You are here:>>Dual Current / Voltage powered by DC-DC Converter
Dual Current / Voltage powered by DC-DC Converter 2017-03-28T23:23:11+00:00

Home › Forums › Panel Meter Support › Dual Current / Voltage powered by DC-DC Converter

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Sheldon
    March 28, 2017 at 11:23 pm
    Post count: 0
    #14229 Reply |

    So, most (all?) of your products require the ammeter shunt to be placed in low / ground / return side of load & meter. Do you have a dual display (I&V) that uses a shunt in high side?

    Would there be problems if I used a DC-DC converter, with high isolation, and place shunt in high side?

    Drok
    Keymaster
    April 1, 2017 at 5:22 am
    Post count: 2971
    #14437 Reply |

    Hello Sheldon,
    Thank you for writing in.
    Could you please tell us more detail about your requirement?
    For example, the measure range for voltage& current, the power supply and other parameters.
    Look forward to your reply.
    Best regards.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Dual Current / Voltage powered by DC-DC Converter
Your information: