You are here:>>Getting 56VDC for 40W unit using the 600W 12A Step-up
Getting 56VDC for 40W unit using the 600W 12A Step-up 2016-10-22T17:08:07+00:00

Home › Forums › Advice › Getting 56VDC for 40W unit using the 600W 12A Step-up

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Clay
    October 22, 2016 at 5:08 pm
    Post count: 0
    #9930 Reply |

    DROK® 600W 12A DC Boost Voltage Converter 12-60V to 12-80V Step-up Power

    I am powering this with a 48VDC 6Amp power supply with a load of 40Watts at 56VDC. Just how do I accomplish getting to 56VDC. Not able to accomplish this yet.

    Drok
    Keymaster
    October 24, 2016 at 2:17 am
    Post count: 2971
    #9956 Reply |

    Hello Clay,
    Thank you for writing in.
    Have you tried to adjust the CV potentiometer?
    If not, please try to clockwise adjust the CV potentiometer until the output voltage reach 56V.
    Hope this can help you.
    Bets regards

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Getting 56VDC for 40W unit using the 600W 12A Step-up
Your information: