You are here:>>How to monitor Energy usage on 220v sub panel
How to monitor Energy usage on 220v sub panel 2016-07-01T14:41:56+00:00

Home › Forums › Panel Meter Support › How to monitor Energy usage on 220v sub panel

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Chester Graham
    July 1, 2016 at 2:41 pm
    Post count: 0
    #6061 Reply |

    Do I need two “DROK® Digital Multimeter AC 80-260V 100A Voltage Amperage Power Energy Meter AC Volt Amp Tester Voltmeter Ammeter Watt Meter LCD Digital Blue Display Volts Current Measuring with Transformer CT” meters, one on each leg to monitor a 220v sub panel, or is there a way to do it with one meter?
    Chester Graham

    Drok
    Keymaster
    July 4, 2016 at 1:30 am
    Post count: 2971
    #6106 Reply |

    Hello Chester Graham,
    Thank you for writing in.
    One meter is Ok.
    Here is the wiring diagram of the meter:
    Wiring diagram_200123
    Hope this can help you.
    Best regards

    Dereck
    September 11, 2016 at 1:16 am
    Post count: 0
    #8462 Reply |

    I have the same meter but want to read the voltage of a 220v water heater element. I hooked up the 2- 110v leads that go to the element into the meter and it fried it. Is what I want to do possible ? Thank you

    Drok
    Keymaster
    September 12, 2016 at 4:06 am
    Post count: 2971
    #8673 Reply |

    Hello Dereck,
    Thank you for writing in.
    Have you connected this meter to read the voltage of a 220V water heater?
    Was it burnt?
    What are the 2-110V leads for?
    So sorry that we are not sure the details of application.
    Could you please tell us more details about it?
    With your help, we can find a solution more quickly.
    Best regards

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: How to monitor Energy usage on 220v sub panel
Your information: