How to reset accumulated energy for DROK DC 0-300V 200A STN LCD

[RayC September 18, 2020 at 1:05 am Post count: 0]

#46710 Reply |

Hi,
On product at https://www.amazon.com/dp/B07B4CWKRJ/ref=as_li_tl?tag=proeng-20
how do I reset charge/discharge accumulated energy (WH) in lower right of display?
I can reset SOC gauge by holding down square button until CCC.C (empty) or FFF.F (full) shows up in Ah.
I can reset to quiescent current (zero A) by holding down triangle button until CCC.C shows up in current.
I have seen the lowercase ccc.c show up in WH, but I don’t know the exact procedure to get that. I never see that show up if I hold down ether the square or triangle button.
Is there a certain state it needs to be in – light on, wait 1 minute after clearing something, disconnect and reconnect holding a button? I just don’t know how to do it on command.

Can someone please help and let me know how to clear it?

Thanks,
Ray

[DrokKeymaster September 21, 2020 at 6:44 am Post count: 2971]

#47322 Reply |

Hello RayC,

Please hold the square button for more than 3 seconds when it is in start screen. Just like  holding down trigangel button to reset no-load current.

Any more questions, please let us know.

Best regards,

DROK

[Author]

Posts