You are here:>>Instructions for Light Control Sensor
Instructions for Light Control Sensor 2016-04-16T09:39:25+00:00

Home › Forums › Advice › Instructions for Light Control Sensor

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • Jerry
    April 16, 2016 at 9:39 am
    Post count: 0
    #4339 Reply |

    Hello I have just received a DEOK DC 5-12V Light Control Sensor Switch Day Off Night On Automatic Adjustable.

    Do you have instructions? I want to know how to adjust the light sensitivity.

    Also, I want to trigger a motor to run when its dark and then trigger the same motor to run in reverse when it’s daylight, will I need two light sensors for this?

    Many thanks

    Jerry

    Drok
    Keymaster
    April 18, 2016 at 3:42 am
    Post count: 2971
    #4384 Reply |

    Hello Jerry,
    Thank you for writing in.
    Please check the attach image, you can adjust the light sensitivity by adjusting the potentiometer which is marked by yellow circle.
    090221
    Theoretically, you can use one of this product and one of DEOK DC 5-12V Light Control Sensor Switch Day On Night Off Automatic Adjustable to trigger the motor (the motor should have positive and negative poles).
    However, this product is not really suitable for this application. If work at the same time, the motor may be burnt.
    Hope this can help you.
    Best regards

    Colin Townend
    September 25, 2016 at 2:18 pm
    Post count: 0
    #9306 Reply |

    I recently purchased a DEOK DC 5-12 volt light control sensor switch but am at a loss as to how to wire it up. I have 5 volt solar panel connected to 4.5 rechargeable battery pack which I want to power 3 LED Lights, obviously I want them to light at night. Can you give me advice as to how the sensor switch is connected?

    Yours faithfully Colin Townend

    Drok
    Keymaster
    September 26, 2016 at 2:54 am
    Post count: 2971
    #9333 Reply |

    Hello Colin Townend,
    Thank you for writing in.
    Could you please tell us your order ID or the link of the product so that we can ensure which product you are referring to?
    With your help, we can find a solution more quickly.
    Looking forward to hearing from you.
    Best regards

    Felix Borg
    January 10, 2017 at 8:12 pm
    Post count: 0
    #11523 Reply |

    How to Connect Deok Dc 5-12v Light Control Sensor Switch Day Off Night On Automatic Adjustable with sola 12v
    Thank you Felix

    Drok
    Keymaster
    January 15, 2017 at 9:14 am
    Post count: 2971
    #11591 Reply |

    Hello Felix Borg,
    Thank you for writing in.
    We wonder if the followin product is what you mention.
    https://www.amazon.co.uk/Control-Sensor-Switch-Automatic-Adjustable/dp/B00H32D0Q4/ref=sr_1_1?ie=UTF8&qid=1484469589&sr=8-1&keywords=Deok+Dc+5-12v+Light+Control+Sensor+Switch+Day+Off+Night+On+Automatic+Adjustable
    If yes, this picture may help you with connection.
    090221
    Best regards

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: Instructions for Light Control Sensor
Your information: