JS-C33 Programming submenus 2 & 3

[Ramon L Collazo July 15, 2019 at 12:07 pm Post count: 0]

#36187 Reply |

Hello. In submenu 2, is the delay the time that the display stays on?

In submenu 3, what does the right side mean? Is it a voltage or a percentage? What does “upper voltage” mean?  The default is the same on both sides, so this is invalid according to the instructions. What are the settings for a standard car 12V battery?

[DrokKeymaster July 16, 2019 at 8:19 am Post count: 2971]

#36191 Reply |

Hello Ramon L Collazo，

Thanks for writing in.

As per your inforamtion, it shoud be 2001710003

Submenu 2 is for delayed shutdown. If you set delayed time, meter will turn off after that time.

If your 12v battery is leacd-acid type, please set P12v in submenu 1.

Submenu 3 is custom setting. Some battery specifications are not available  in Submenu 1, then you can choose submenu 3.

You just need to set minimum voltage and maximum voltage for your battery.  Hope that can help you.

Best regards

 

 

[Neil Hovdestad March 13, 2021 at 12:14 am Post count: 0]

#63301 Reply |

I am unsure what to program setting 3.

I have an application using 10 6 volt lead acid batteries.

What do you suggest I set it to?

Thanks

[DrokKeymaster March 15, 2021 at 7:09 am Post count: 2971]

#63538 Reply |

Hello Neil Hovdestad，

Are you talking about 2001710003? You can program menu 1 or menu 3, both are for battery type setting.

Menu 3 is custom setting, which is suitable for any battery type. You have to set a minimum and maximum voltage for battery.

Best regards.

[Author]

Posts