Home › Forums › Voltage Regulator Support › l need the manual for DROK® Battery Capacity Tester Indicator Monitor Meter for
Tagged: product manual attached
-
AuthorPosts
-
Isaac AtisonSeptember 7, 2015 at 5:44 amPost count: 0
Hello team,
I purchase DROK® Battery Capacity Tester Indicator Monitor Meter for 12V – 48V Lead-acid Lithium Batteries LCD Panel Display from Amazon.com recently.After receiving the product i am unable to adjust the level and there is no product manual attached.
Please Assist
Isaac Atison
Customer from Amazon.comWes SSeptember 16, 2015 at 8:47 pmPost count: 0-Any available info on the solder pads on the rear labeled F1 through F6?
-They are shown on the diagram along with their function. How are they activated? Momentary closure? Toggle closure? Short to ground?
-Must they be activated while in the config mode or can they be used in normal mode?Thanks.
Isaac AtisonSeptember 17, 2015 at 8:06 amPost count: 0Isaac AtisonSeptember 18, 2015 at 12:23 pmPost count: 0Isaac AtisonOctober 29, 2015 at 4:55 amPost count: 0Hello team,
I purchase DROK® Battery Capacity Tester Indicator Monitor Meter for 12V – 48V Lead-acid Lithium Batteries LCD Panel Display for my gel lithium 12v 200AH battery for my inverter system. my DROK® Battery Capacity Tester Indicator Monitor is unable to detect the batter and i am not able to setup. Kindly give me step by step procedure to enable the battery tester to detect the battery and calibrate the battery tester.
Thank you
Br//Isaac
Lexi GoldenDecember 24, 2016 at 10:47 pmPost count: 0DanJuly 27, 2017 at 12:36 amPost count: 0 -
AuthorPosts