You are here:>>Manual for 900W NC Regulator
Manual for 900W NC Regulator 2017-04-21T15:57:54+00:00

Home › Forums › Advice › Manual for 900W NC Regulator

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Jeffrey
    April 21, 2017 at 3:57 pm
    Post count: 0
    #15789 Reply |

    Can you post or email me the user manual for this product:

    https://www.amazon.com/dp/B01GFVI6R6/ref=twister_B01HBETQ52?_encoding=UTF8&th=1

    DROK Numerical Control Regulator DC 8-60V to 10-120V 15A Boost Converter, Constant Step Up Module Adjustable Output 48V 24V 12V DC Power Supply with LED Display

    I am considering using this product with a Solar Charge Controller to use as a DC/DC charger. I will use it for charging the battery on my trailer. By the time the voltage gets back to the trailer from the car, its dropped too low to fully charge the trailer battery. So I want to use your product to step up the voltage to 18 volts from 11-12 and charge the battery through my solar charge controller. I would use a DPDT relay to switch between solar panels and your voltage regulator which is connected to the tow vehicle. But to do this I need to limit the amperage, I do not want to draw more than 15 amps from the input side, or provide more than 7 amps on the output side. This regulator has current settings, but I have no idea what they do without the manual (which I can not find posted online).

    Thanks!

    Drok
    Keymaster
    April 23, 2017 at 9:12 am
    Post count: 2971
    #15886 Reply |

    Hello Jeffrey,
    Thank you for writing in.
    Here is an instruction for your reference.
    200150
    Hope it can help you.
    For any questions, please let us know.
    Best regards.

    john
    October 7, 2017 at 11:26 pm
    Post count: 0
    #22798 Reply |

    I am also having trouble making heads or tails of setting up the various modes. I cant figure out how to set the input cut off voltage parameter for when it starts to regulate the output voltage to save the input voltage from falling too low. This is causing my light setup to basically not run at maximum power. What are the physical button presses required, as the Chinese translated instructions aren’t very good at explaining the process?

    Drok
    Keymaster
    October 12, 2017 at 7:10 am
    Post count: 2971
    #23090 Reply |

    Hello john,
    Thanks for writing in.
    It seems you are not talking about the same item. Would you please kindly send us the product link for confirmation? And please kindkly let us know more details about your operation parameters.That would be helpful for us to find solution for you.
    Best regards.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: Manual for 900W NC Regulator
Your information: