Missing a mode SKU:300350

[Richard June 6, 2020 at 5:39 am Post count: 0]

#39270 Reply |

Nice little timer board but it is missing a mode.  It needs a mode that as soon as power is applied the delay (OP) starts count down (similar to P6 not requiring external trigger).  When OP reaches zero the relay closes for the amount of time programmed in CL and then opens when the CL timer has finished.  If needed then LOP can repeat.  This mode could be used to ‘press’ the power button after power is restored (and stable) on some devices that do not have the ability to automatically power back on after power loss for example.

[Richard June 6, 2020 at 5:40 am Post count: 0]

#39271 Reply |

Sorry, SKU  200350

[DrokKeymaster June 8, 2020 at 8:47 am Post count: 2971]

#39345 Reply |

Hello Richard,

P6 doesn’t require  trigger signal. Relay should be energized once power on.

If there are any questions, please kindly let us know.

Best regards,

DROK

[Author]

Posts