You are here:>>Model 200444 Wiring Question
Model 200444 Wiring Question 2021-01-26T00:41:02+00:00

Home › Forums › Panel Meter Support › Model 200444 Wiring Question

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • Matt
    January 26, 2021 at 12:41 am
    Post count: 0
    #58314 Reply |

    I am installing this meter :

    https://www.droking.com/digital-ac-display-multimeter-80-300v-100a-voltage-current-power-factor-frequency-electric-energy-lcd-monitor

    I am using it to monitor an AC 30 amp 240v outlet, which is using 10 gauge wire.

    10 gauge wire is too large to fit in the terminals of the monitor.

    Is it safe to use 14 gauge wire to connect the monitor to the 10 gauge wire with a wire nut? (see picture) wiring

    Matt
    January 26, 2021 at 12:42 am
    Post count: 0
    #58315 Reply |
    Untitled3
    Drok
    Keymaster
    January 26, 2021 at 9:41 am
    Post count: 2971
    #58373 Reply |

    Hello Matt,

    The green terminal is used to measure voltage only, meter will not draw too much current. So it doesn’t matter what kind of wire gauge is.

    Best regards.

    Paul
    June 20, 2023 at 4:38 pm
    Post count: 0
    #116630 Reply |

    I want to measure current of a 220volt heater. Please tell me how to do with this dork 200444 I just bought thank you

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: Model 200444 Wiring Question
Your information: