New at audio equipment

[Alex January 3, 2018 at 12:21 am Post count: 0]

#28545 Reply |

So I’m a bit new at wiring audio equipment,  by that I mean that I have next to no idea what I’m doing. I got an Audio-Technica AT-LP60 turntable that has a pre-amp built in, that has output for both phono and aux,  a pair of Micca MB42 bookshelf speakers, and a drok audio TPA3116 mini power amp and I’m not sure what DC input I’ll need, if the 14AWG wires I have are enough, or if I’m on he right track in the first place.

[Alex January 3, 2018 at 12:30 am Post count: 0]

#28546 Reply |

phono ouput is 2.5 mV nominal at 1 kHz, LINE (AUX) is 150 mV nominal at 1 kHz.

MB42 power handling : 75 watts (each)) Impedance 4-8 Ohms

 

[DrokKeymaster January 5, 2018 at 7:29 am Post count: 2971]

#28617 Reply |

Hello Alex,
Thanks for writing in.
Is this the amplifier you mean?
200138
Its power supply can be DC 9-25V (Current is above 3A, if you would like a higher power, 19-24V/above 4A is more suitable)
Best regards.

[Alex January 5, 2018 at 3:14 pm Post count: 0]

#28628 Reply |

That might be the board, this is what I ordered.

[DrokKeymaster January 7, 2018 at 7:34 am Post count: 2971]

#28662 Reply |

HellO,
For this item, we suggest power supply can be 12-24V. You need to think about if the power supply can offer enough power to your speaker. For some small speaker, 12V/5A power supply should be suitable.
Best regards.

• This reply was modified 6 years, 8 months ago by  Drok.

[Author]

Posts