Problems with DC 6V-65V auf 0–60V Buck Converter 8A 400W CC CV NC

[titusParticipant January 25, 2020 at 9:50 pm Post count: 1]

#37402 Reply |

Hello

I have a Problem with my Drok Buck Converter.

It is powerd by a power supply that makes 24V an 6.5A. But when I want to select the Voltage and Amps it has no effect to the output volage and amps.

The Buck converter is always reducing the valtage by 2 V but I cant influence them.

Also a Problem is that when I press the OK button the output voltage is already on. And when I press the SET button the voltage is not shutting off.

Automatically output is OFF

[DrokKeymaster February 22, 2020 at 8:22 am Post count: 2971]

#37495 Reply |

Hello，

To check what wrong it is, would you like to tell us how did you adjust voltage and current? Have you locked the adjsuted  buttons?

And is the output current zero after turning off output? If there is no current, that mean you have turned off output.

Best regards.

[Author]

Posts