Request for product

[Kristopher Cox April 17, 2022 at 12:41 pm Post count: 0]

#91843 Reply |

<div data-ogsc=”rgb(0, 0, 0)” data-ogsb=”rgb(255, 255, 255)”>I need a delay controller that has only 1 function programmed.  When triggered – its need to wait .1 to 99.9 seconds – turn on the relay for 4 seconds – then shut off. Cycle 1 time. It would need a 3 led segment display w/ decimal point. I would like the set function to only allow change to the delay time up or down the timer is set for.  I need to power it with a 6v source.  Is this something that you can help with?  I would need a qty of 1000 pcs to start.  What would pricing and delivery time be?  Thanks for your time.</div>
<div>
<div data-ogsc=”rgb(0, 0, 0)”></div>
</div>

[DrokKeymaster April 18, 2022 at 10:11 am Post count: 2971]

#91864 Reply |

Hello Kristopher Cox,

Does it triggered by signal? And how large is the load power you need to control? We can make some changes based on original item. Is there any product meet your need?

[Kristopher Cox April 18, 2022 at 8:18 pm Post count: 0]

#91878 Reply |

the timer that I am currently using is this one

DC 5V 12V 24V Digital LED Display Infinite Cycle Delay Timer Switch ON/OFF Relay Module (DC 5V): Amazon.com: Tools & Home Improvement

Yes is it triggered by ground.  The application that i am using it for – the end user may need to change the desired delay time and the button sequence to do that needs to be as simple as possible

[Kristopher Cox April 18, 2022 at 8:18 pm Post count: 0]

#91879 Reply |

P8 is the program function that I need replicated

 

[DrokKeymaster April 19, 2022 at 9:44 am Post count: 2971]

#91896 Reply |

Hello,

Sorry, that is not sold by us, we can’t confirm how it is. You may check if there are similar item in our store, below are two for your reference.

#200119,   https://www.amazon.com/dp/B017GZW0WW?ref=myi_title_dp

#200399,  https://www.amazon.com/dp/B07DFT2WDS?ref=myi_title_dp

[Kristopher Cox April 19, 2022 at 10:41 pm Post count: 0]

#91908 Reply |

I have a #200399 – this module would work fine for my needs – just need the custom program setup in the eprom – what would pricing be in qty 1000?

[DrokKeymaster April 20, 2022 at 8:47 am Post count: 2971]

#91931 Reply |

Hello,

About custom item, we need to check with factory.  Please confirm custom details firstly.

1.With trigger signal, there is  0.1 to 99.9 seconds  delay time before turning on relay. Do you hope the delay time is adjusted by user?

2. Cycle times is once, should we save the setting for cycle times?

For more detail, would you pleaes send email to service@droking.com?

Best regards,

DROK

 

[Author]

Posts