You are here:>>Setting a volt meter for Lithium acid batteries
Setting a volt meter for Lithium acid batteries 2020-10-23T18:10:29+00:00

Home › Forums › Any Other Products › Setting a volt meter for Lithium acid batteries

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Bob Dunn
    October 23, 2020 at 6:10 pm
    Post count: 0
    #50603 Reply |

    1.  How do I set the meter program for LIthium acid batteries.  Instructions say to cll if anything other than led acid but no phone number is listed

    2.  How do I clibrate voltage under menu #5 for 48v?  Do not have a source for 20 v calibration.  Have 4-12v 60 aH batteries in series. eithe can calibrate for 48 v or 12 v (or multiple therof).  Also under this menue when I change voltage reading on right side to 48.0 V the  left indictor still reads 20.  What does the number on the left hand side indicate

     

    3.  No instructions for menue 3 “Customise the voltage of percentage 0 to 100”  In fact not sure what we are doing inthis step.   Is the “00” = to 100% or is that actually 0%

     

    Drok
    Keymaster
    October 26, 2020 at 9:31 am
    Post count: 2971
    #50839 Reply |

    Hello Bob Dunn，

    If voltaga reading is not accurate, you can calibrate voltage. Or please ignore menu#5.

    Both menu 1 and menu 3 are for battery specification setting.  If you progarm menu 1, please don’t program menu 3.

    Ther are some fixed options in menu 1. If you can’t find suitable battery type, just program menu 3. You need to set minimum voltage and maximum voltage for  battery.

     

     

     

     

    If no suitable

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Setting a volt meter for Lithium acid batteries
Your information: