SKU 2001712003, LCD Hall Cullen Meter Current Voltage Meter

[Allen November 22, 2019 at 1:14 am Post count: 0]

#37095 Reply |

I just received this and connected everything correctly. I reset the display values to “0” as instructed then tried to set the user specified values for AH, FU, HU, LU and HA. My question is my battery is a LiFePo rated at 400AH so I set the AH at 400 but what do I set the FU? Neither the battery picture nor the AH values in the display reflect anything while the battery is charging or discharging. The A, V, W and WH values on the display are changing as expected.

[Allen November 22, 2019 at 4:04 am Post count: 0]

#37096 Reply |

I figured this out. I had the wrong voltage (way too high) in the “FU” setting.

[DrokKeymaster November 22, 2019 at 9:05 am Post count: 2971]

#37097 Reply |

Hello Allen,

Thanks for sharing your experience here.

Best regards.

[Nar April 25, 2020 at 3:31 pm Post count: 0]

#37826 Reply |

I just hooked up my meter but there is F.FF A in the current display. What’s going on?

 

[DrokKeymaster April 26, 2020 at 9:12 am Post count: 2971]

#37843 Reply |

Hello Nar,

Are you taling about #2001712003 meter？If it indicated”FFF”, that mean current is out of measuring range.

How much current did you input?

Best regards.

[Edward Johnson July 26, 2020 at 11:50 am Post count: 0]

#41865 Reply |

Can you send me the link for your 2001712003us LCD Hall Cullen Meter.  I need instructions on how to program the various values.

Thanks

 

[DrokKeymaster July 27, 2020 at 9:55 am Post count: 2971]

#41944 Reply |

Hello Edward Johnson,

Here is instruction for 2001712003, https://m.media-amazon.com/images/I/B1ubSSVdpyS.pdf

Best regards.

[Mike GUSTAFSON July 31, 2020 at 7:08 pm Post count: 0]

#42229 Reply |

My Cullen Current/voltage is pretty much working except the Battery icon display is working backwards? As I pull current from the main battery the battery display “fills up” rather decline as expected. The numerical current number shows a negative sign in front of the value, which correct. (like -30) When the battery charger is on the current number does not have the negative sign (like 30). All of this seems ok.

How do I get the battery icon to work properly? The battery should decrease as current is pulled from the battery and “fill up” as the charger recharges the batteries.

Thank you

Mike

 

[DrokKeymaster August 2, 2020 at 3:39 am Post count: 2971]

#42342 Reply |

Hello Mike GUSTAFSON，

You may reverse sensor connection.  Current reading with negative sign means that is charging status instead of discharging. Please change the current direction on sensor.

Any more questions, please let us know.

Besr regards,

DROK

[Hannu Pekkarinen October 13, 2020 at 1:08 pm Post count: 0]

#49578 Reply |

My meters show 30% too much on amp

How can I set the correct value ?

[DrokKeymaster October 14, 2020 at 6:50 am Post count: 2971]

#49659 Reply |

Hello Hannu Pekkarinen，

Is it #2001712003? How large is the actual current?

If possible, would you like to show us more details by images so that we can check further?

Best regards.

 

[Martin Pike December 26, 2020 at 10:34 pm Post count: 0]

#55965 Reply |

Hello,

Im having problems calibrating my new Drok LCD Hall Cullen meter.   The battery is fully charged with no load, and I followed instructions to clear current and energy. My battery has a reserve capacity of 88 amp hours.  So I loaded that in using the instructions, and took the values properly.   I set the FU to 12.6 volts.   However the bar, and the upper right hand AH value is telling me that my remaining capacity is near zero, which is impossible.
The other odd thing I noticed is that when I “cleared” the current and energy by holding the buttons as instructed, the lower right hand number (accumulated energy) does not clear. Any suggestions?

[DrokKeymaster December 28, 2020 at 6:23 am Post count: 2971]

#56072 Reply |

Hello Martin Pike,

For  #2001712003, did you fully charge the battery after setting?

Notice:  it can’t show correct battery icon and remaining capacity at once. You have to fully charge battery again to enable it. Pleasse make sure charging current flows through current sensor.

And did you hold the upper button 3 seconds to reset enrgy?

Best regards,

DROK

[Co January 13, 2021 at 5:07 pm Post count: 0]

#57215 Reply |

Had graag een PDF voor de instellingen voor de SKU 2001712003

Geen foto maar de normale PDF die ik kan vertalen naar Nederlands

Gr. Co Renkema

[DrokKeymaster January 14, 2021 at 3:02 am Post count: 2971]

#57253 Reply |

Hallo, Aarzel niet om de pdf-handleiding hier te downloaden, https://m.media-amazon.com/images/I/B1ubSSVdpyS.pdf

Vriendelijke groeten, DROK

———————————–

Hello，

Please feel free to download PDF manual here, https://m.media-amazon.com/images/I/B1ubSSVdpyS.pdf

Best regards,

DROK

[Author]

Posts