Stablize 12v output to run TV that requires 12v 2A

Viewing 5 posts - 1 through 5 (of 5 total)

Author

Posts
Aaron H
June 7, 2016 at 7:35 pm

Post count: 0

#5318 Reply |

Hello,

I would like to install two LCD TV screens in my motorhome using the 12v automotive system.

TV #1 requires 12v 2A.

TV #2 requires 19v 2A.

Can you recommend a product/s with an input that varies from ~ 12v-15 but will provide a steady output of 12v ?

Thanks

Drok
Keymaster

June 8, 2016 at 6:46 am

Post count: 2971

#5330 Reply |

Hello Aaron H,
Thank you for your interest in our product.
Here is the recommendation for you:
DROK® DC-DC Automatic Buck Boost Converter 6V-35V 1-35V 5A Step Down/Step Up Voltage Regulator Adjustable Output Volt 5V 12V Power Supply for Car Auto Vehicle Motor Regulated SR

Parameters：
Input voltage: DC 6V to 35V
Output voltage: DC 1.0V to 35V（please note output voltage can be more/less than input voltage as this is a buck/boost converter）
Boost Transfer efficiency: about 90%(90% is gained when input 12V and output 19V/2.5A;please note that efficiency is related to input/output voltage and current)
Buck transfer efficiency: 88%
Max input current: 7A(please leave margin for long-term working)
Max output current: 5A(please leave margin for long-term working)
Dimension: 70*40*31mm

Hope this can help you.
Best regards

Aaron H.
June 8, 2016 at 11:03 am

Post count: 0

#5331 Reply |

Thank you, will this also work with the TV that requires 19v too?

Aaron

Jon
June 8, 2016 at 2:39 pm

Post count: 0

#5332 Reply |

The unit produces 1-35v, so yes it will do for either TV.

Drok
Keymaster

June 12, 2016 at 3:20 am

Post count: 2971

#5364 Reply |

Hello Aaron H.,
Yes, it will. The output voltage of this product is DC 1-35V.
Hope this can help you.
Best regards
Author

Posts

Viewing 5 posts - 1 through 5 (of 5 total)