TDA7498 2x100w amp question

[Bob July 12, 2016 at 8:21 pm Post count: 0]

#6330 Reply |

I see there are 2 RCA inputs on the TDA7498 amp. Can I connect my iphone using a 3.5mm to RCA adapter? I just want to make sure it will work since the iphone isn’t a line level input.
Thanks,
Bob

[DrokKeymaster July 13, 2016 at 2:04 am Post count: 2971]

#6339 Reply |

Hello Bob,
Thank you for writing in.
The two audio inputs of this products are 3.5mm interfaces.

You can use a 3.5mm to 3.5mm adapter to connect your iPhone to the amp board.
Hope this can help you.
Best regards

[Scott Fones August 5, 2016 at 8:59 pm Post count: 0]

#6856 Reply |

Do you have a source for the 3 pin connector for the audio output for the TDA7498 amp?

[DrokKeymaster August 7, 2016 at 3:10 am Post count: 2971]

#6895 Reply |

Hello Scott Fones,
Thank you for writing in.
So sorry that we are sure what the 3 pin connector for the audio output is.
Could you please tell us more details of it?
It is better that you can send us a image to lest us check what it is.
There is 2.54*3 pin dual channel audio input in this product.
Looking forward to hearing from you.
Bets regards

[Author]

Posts