Gentlemen, I have a DROK 2203 adjustable buck: I am trying to power 2 automotive headlight bulbs with a 16 VDC automotive AGM battery. The specifications on the bulbs are 12VDC  rated at 4.35 Amps per bulb. The wiring from the adjustable buck to the 2 headlight bulbs will be 14 ga. and the wire run will be 7 feet long. The length of time the 2 bulbs will  be on is approximately 5 minutes, then switched off. My concern is not the voltage part as I can adjust to get the 12 volts I need, but I am not sure of the Amp load.

In your opinion, will this 2203 Drok work?. If not could you recommend the Drok number that I need.

Thank you for your help and advice!