You are here:>>Time delay relay
Time delay relay 2019-01-27T21:23:08+00:00

Home › Forums › Advice › Time delay relay

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Matthew
    January 27, 2019 at 9:23 pm
    Post count: 0
    #35428 Reply |

    I have my relay hooked up as the schematic says to. The numbers light up and count down as they should. I’ve tried every setting. I know the relay is kicking in and out as its set for because I can hear it working. But i still don’t get any power out of S0 and S1. What do I do?

    Drok
    Keymaster
    January 28, 2019 at 7:37 am
    Post count: 2971
    #35432 Reply |

    Hello Matthew,

    Besides power supply connected to VCC and GND, could you please tell us if you connect the other power supply for load? The power goes through  VCC and GND is for powering on item only, it doesn’t offer power for load.

    Best regards

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Time delay relay
Your information: