Timer SKU-200202

[Nuwaid March 4, 2017 at 7:48 pm Post count: 0]

#13241 Reply |

I’ve bought a multifunctional timer (https://www.amazon.co.uk/DROK-Circuit-Cyclical-Multifunctional-Controlling/dp/B01J7GUC1E/ref=pd_sbs_60_3?_encoding=UTF8&psc=1&refRID=N7B4DD82Q7YED1N2W8FA) for a project. I’m not used to this, i managed to understand the setting from the manual(ishh) provided. But i cannot start the timer on/counting down, that is i dont know how to trigger the module. Could you provide the data sheet which could be very useful. ASAP

[DrokKeymaster March 6, 2017 at 9:44 am Post count: 2971]

#13303 Reply |

Hello Nuwaid,
Thank you for writing in.
We are sorry for what happen. Could you please let us know how you operate it so that we can give you some guidances?
We will try our best to assist you.
Best regards.

[Peter January 10, 2018 at 10:17 am Post count: 0]

#28882 Reply |

Hi Drok,

same problem here. I have set the timer module to mode P3.1 and made my required timing settings. But after leaving the SET mode it’s not possible to start the timer so that it runs the program.

What must be done to run the timer program after setting the mode and times?

 

Thanks & best regards, Peter

[DrokKeymaster January 11, 2018 at 9:07 am Post count: 2971]

#28939 Reply |

Hello Peter,
After seting, did you keep press “SET” button for 2 seconds then release it?
Best regards.

[Author]

Posts