You are here:>>UPS PS Model 4310 Datasheet
UPS PS Model 4310 Datasheet 2016-06-23T02:40:54+00:00

Home › Forums › Voltage Regulator Support › UPS PS Model 4310 Datasheet

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • JohnFC
    June 23, 2016 at 2:40 am
    Post count: 0
    #5793 Reply |

    Can you please direct me to the datasheet for the DROK 110V 220V UPS Battery Backup Uninterruptible Switching Power Supply 12V 120W 110V-240V to 13.5V DC 50/60Hz with Battery Interface for Charging, Model # 4310. Amazon ASIN B00EAIG17E. I am specifically interested in the 4-pin CN1 connector and what I might be able to do with it. Thank You.

    Drok
    Keymaster
    June 23, 2016 at 2:56 am
    Post count: 2971
    #5796 Reply |

    Hello JohnFC,
    Thank you for writing in.
    Here the PDF file is the Datasheet of the product:
    DATASHEET_090947
    Hope this can help you.
    Best regards

    JohnFC
    June 23, 2016 at 4:23 am
    Post count: 0
    #5802 Reply |

    Thank you for the quick response. I do not see any mention of the CN1 connector for this device. CN1 is a four-pin connector next to the BATT +/- terminal connections. Is there any useful purpose for it, maybe for indication or control when installed in a custom chassis?
    Thanks

    Drok
    Keymaster
    June 24, 2016 at 6:11 am
    Post count: 2971
    #5852 Reply |

    Hello JohnFC,
    These 4 pins are for connecting two LED indicators.
    One is used for indicating that the mains supply is on.
    The other one is low voltage indicator for reminding that the voltage of the backup battery is lower than 10V when the battery is discharging.
    LED 1+: Powered by backup battery, with output voltage (the voltage of the battery), when the battery is discharged to 10.5V, the red LED indicator will be on.
    LED 1-
    LED 2+: Powered by mains supply, with voltage output (the voltage of the mains battery), the green indicator will be on.
    LED 2-
    pins_100384
    Hope this can help you.
    Best regards

    JohnFC
    June 25, 2016 at 1:54 am
    Post count: 0
    #5877 Reply |

    Yes, perfect! Thank You.

    Drok
    Keymaster
    June 27, 2016 at 3:21 am
    Post count: 2971
    #5923 Reply |

    Hello JohnFC,
    You’re welcome.
    If you have any questions, please feel free to contact us.
    Have a nice day!
    Best regards

    Steven David Salmon
    September 29, 2021 at 5:15 pm
    Post count: 0
    #81871 Reply |

    HI there

    Is it possible to have a circuit diagram for the 4310 10A 12 Volt UPS.  Mine has stopped working and although I have AC in through the fuse I do not have any DC out.  There is no sign of burning/overheating.   The power supply has always been working well and way below its maximum rang.

    Thank You.

     

    Drok
    Keymaster
    September 30, 2021 at 9:12 am
    Post count: 2971
    #81915 Reply |

    Hello，

    We are sorry there is no circuit diagram, and it has been  discontinue since 2018.

    Best regards.

    Russell N Mirov
    October 25, 2021 at 5:20 am
    Post count: 0
    #83480 Reply |

    Are there any similar battery-backed supplies available now ?  12V would be fine, but 24 would also work.

    Drok
    Keymaster
    October 25, 2021 at 9:30 am
    Post count: 2971
    #83495 Reply |

    Hi

    Sorry, for now we don’t sell this kind of item.

    Best regards.

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
Reply To: UPS PS Model 4310 Datasheet
Your information: