VAC8010F 0-400V Wireless DC Coulomb Meter with Hall Effect Sensor

[Brett October 17, 2019 at 4:15 pm Post count: 0]

#36796 Reply |

The VAC8010F with the hall effect sensor instead of a current shunt is a wonderful product!  I have installed it in my moterhome to monitor batter usage.   With slightly better packaging it should be standard equipment in RV’s around the world.    This instructions mention a battery temperature sensor, but I do not see any way to connect a thermocouple to measure battery temperature.  It would be wonderful if the battery temperature sensor was wireless and waterproof designed to be installed in the battery compartment of my RV.   So my question is, How do start to use the battery temperature function?

It look like you company is designing and building multiple very useful products that use advanced electronics to solve many power monitoring and use problems Keep up the good work.

I would love to see a DC to AC inverter the had a center tapped 110/220 transformer or equivalent electronics.  I have  a water well pump that need 220 volt 60 hz but almost everything else in my home is 110 volt 60 hz.  I would like split phase inverter that has variable input voltage could connect to the the car batteries of hybrid cars like a Toyota Prius as they are very efficient DC generators.

 

Thank You

Brett

 

 

 

 

 

[DrokKeymaster October 18, 2019 at 9:56 am Post count: 2971]

#36804 Reply |

Hello Brett，

Thanks a lot for your supporting and feedback.

Temperature sensor is pluged into the measuring module directly.

We will never stop working to offer better products. Look forward to more cooperation in the future.

Best regards.

• This reply was modified 4 years, 11 months ago by  Drok.
• This reply was modified 4 years, 11 months ago by  Drok.

[Frank December 13, 2019 at 7:23 pm Post count: 0]

#37191 Reply |

VAC8010F will be also available with wired temperature sensor on measurement module, the other version has also the 2-pin-connector near the current-sensor-connector in measurement module and the measurement module wireless transmission included the temperature, but the display module doesn’t show it 🙁

would be nice to know, what type of temperature sensor is needed and where the firmware for the display module(with temperature) is available …

Not nice, that on different market places the produkt is descripted with temperature measure, but not included with temperature sensor

[DrokKeymaster December 16, 2019 at 2:12 am Post count: 2971]

#37195 Reply |

Hello Frank，

We are sorry the version we are selling is not with temperature measurement. And it doesn’t have port for connecting temperature sensor.

Best regards.

[Frank December 17, 2019 at 2:10 pm Post count: 0]

#37203 Reply |

But the site https://www.droking.com/Digital-Meter-Multifunction-Panel-Meter-DC-6V-80V-300A-999-KW-LCD-Display-Tester-Monitor-Meter-Multimeter-Thermometer?search=vac8010f&description=true show the version WITH temperature sensor (first picture)

[DrokKeymaster December 18, 2019 at 7:58 am Post count: 2971]

#37210 Reply |

Hello Frank，

We are sorry we got it wrong. 2001711004 is with temperature sensor.

Best regards.

[Author]

Posts