You are here:>>Very low output voltage (approx .5v) and can't adjust
Very low output voltage (approx .5v) and can't adjust 2021-07-03T03:54:17+00:00

Home › Forums › Voltage Regulator Support › Very low output voltage (approx .5v) and can't adjust

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Joe
    July 3, 2021 at 3:54 am
    Post count: 0
    #75547 Reply |

    Hello,

     

    I purchased the DC-DC buck booster converter to step down my 15.4VDC 500mA wind turbine to 12VDC to power a AAA battery charger, which operates at approx. 400mA. When I hookup the turbine to the converter I’m reading input voltage, but I can’t get the any output voltage. I’ve adjusted the amp pot & voltage pot counter clockwise and clockwise, but I’m not getting anything. I’ve tested the DC-DC buck booster with two 9V @ 900mA batteries in series and everything works fine. Any help with how I can get the converter to function with the turbine would be greatly appreciated.

     

     

     

    Joe

    Drok
    Keymaster
    July 4, 2021 at 7:19 am
    Post count: 2971
    #75654 Reply |

    Hello,

    We replied to you in the other post. Please check it.

    DC Buck Converter

    Best regards.

    • This reply was modified 3 years, 5 months ago by  Drok.
  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Very low output voltage (approx .5v) and can't adjust
Your information: