Hello; I am hoping you can help me with this project. Hopefully we will be selling thousands of this design. I am using your model number 100113 voltage panel meter. I am trying to display 5000 to 12000 rpm of an rc motor. the motor is controlled with a servo tester. the servo tester outputs 1000 to 2000 pulse to control the motor rpm. I am using a frequency to voltage converter, NTE995. this reads the pulse like a tachometer and, outputs a scalable voltage related to the input frequency. My question is, can you make your 5 digit panel without decimal points so 12 volts will look like (12000)? is there a way to disable the decimal point feature? Thank you:
Hello william mace,
Thanks for writing in.
If disable the decimal point, that means the precision will be reduce. For example, 12.56V will be changd into 12V. Is it right?
Best regards.
Hello, I am trying to represent the rpm of a radio controlled motor. so if the voltage is 12.56 i would like the meter to display 12560 if the voltage is 9.36 i would like the meter to read 09360, if the voltage is 18.456 i would like the meter to read 18456. Is this possible? I will buy 200 quantity to start. I will buy additional 100 quantities as my product sells. please respond directly to Fuelzer@gmail.com Thank you
Hi william mace,
We had sent you email, but we just found it was failed to be sent to you.
Actually, we want to let you know that we are unable to do as you requirement. We are sorry for that. And
If there are other problem, please let us kow.
Best regards.
william mace
