Wiring 2 Meters with Battery Negative connects to chassis ground

[Andy Koornneef July 29, 2017 at 7:58 pm Post count: 0]

#19906 Reply |

I have 2 of the DROK® Digital Multimeter DC 6.5-100V 100A meters. I want to measure the current charging into my battery from a solar panel and the power my trailer is using. My battery negative terminal connects directly to the chassis ground. Can you provide me with a wiring diagram solution?
Thanks

[DrokKeymaster July 31, 2017 at 10:07 am Post count: 2971]

#20007 Reply |

Hello Andy Koornneef,
Thanks for writing in.
Do you mean you need to use two meters separately to measure the current charging and the power trailer is using?
Best regards。

[Andy Koornneef August 3, 2017 at 2:38 pm Post count: 0]

#20184 Reply |

Yes. I have this wiring diagram

http://img.auctiva.com/imgdata/1/3/5/4/6/7/2/webimg/872783161_o.jpg

It shows the negative wires going to Load. My trailer negative wire goes to the chassis ground. I get he wire from the charger going to the battery but the energy out to the trailer is where I get confused.

Thanks

[Author]

Posts