You are here:>>WLS-PVA200 Voltage only showing what set in CV (CU), and not actual voltage
WLS-PVA200 Voltage only showing what set in CV (CU), and not actual voltage 2022-07-31T17:34:14+00:00

Home › Forums › Panel Meter Support › WLS-PVA200 Voltage only showing what set in CV (CU), and not actual voltage

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Scott
    July 31, 2022 at 5:34 pm
    Post count: 0
    #98486 Reply |

    New WLS-PVA200.
    Using two wire hookup method.  I have additional parameters in setup screens like “CV”, etc. that are not mentioned in documentation.  Whatever is set to “CV” is what voltage is displayed on status screen, and not the live, dynamic voltage.  Need this fixed or must return to Amazon.

    Scott
    August 1, 2022 at 7:20 pm
    Post count: 0
    #98536 Reply |

    Please disregard my previous post.  For everyone who has this latest firmware on WLS-PVA200 and similar models, only set AH and FV.  For all other parameters, leave at 0000.

    I got mine to finally work.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: WLS-PVA200 Voltage only showing what set in CV (CU), and not actual voltage
Your information: