You are here:>>Wrong reading on amperes on the DSN-V288 panel meter
Wrong reading on amperes on the DSN-V288 panel meter 2019-04-09T18:26:20+00:00

Home › Forums › Panel Meter Support › Wrong reading on amperes on the DSN-V288 panel meter

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • Ed Harrison
    April 9, 2019 at 6:26 pm
    Post count: 0
    #35764 Reply |

    Using ZK-SJUA-4X Buck Boost module to DSN-V288 Panel meter.  The ZK-SJUA-4X consistently reads about half the amps it should and the meter DSN-V288 constantly reads double the amps.  The voltage readout is accurate.  For example, 10 volts 15ohms resistance the ZK-SJUA-4X buck boost should read .67.  Instead it reads +-.3.  The meter reads 1.34.  Seems consistent through the voltage range.  What’s wrong?

    Ed Harrison
    April 10, 2019 at 5:23 am
    Post count: 0
    #35767 Reply |

    That’s DSN-VC288 panel meter

    Drok
    Keymaster
    April 12, 2019 at 8:10 am
    Post count: 2971
    #35773 Reply |

    Hello Ed Harrison，

    Thanks for writing in.

    We are sorry we can’t find item by DSN-VC288, would you please kindly send us a product link or ASIN number?

    The meter on buck boost converter can’t be as precise as ammeter.  Did you check current with multimeter?

    Best regards.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Wrong reading on amperes on the DSN-V288 panel meter
Your information: