XH-W1501

[Arne Steinarson February 6, 2017 at 12:47 pm Post count: 0]

#12404 Reply |

This is my second posting to resolve this problem.

I purchased the digital thermostat XH-W1501 from Amazon. After installing it (controlling a 12V pump for a wood burning stove), I encountered two problems:

1 – I cannot enter the menu system. I follow instructions to for example edit “P0”. However the device does not give access to that parameter when I try to enter there.
2 – Even though the diods indicate that the “cooling relay” is active, the relay itself does not change state.

Here is my video demonstrating the problem: https://www.youtube.com/watch?v=TQCQnOGlki0&feature=youtu.be

Please advise.

Arne S.

[DrokKeymaster February 7, 2017 at 10:18 am Post count: 2971]

#12444 Reply |

Hello Arne,
Thank you for writing in.
Could you please send us the link of product you mention?
We can’t confirm which item you bought.
Best regards

[Arne Steinarson February 7, 2017 at 12:00 pm Post count: 0]

#12448 Reply |

It is this one:

https://www.amazon.co.uk/gp/product/B00K8REWYK/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

[Arne Steinarson February 9, 2017 at 1:35 pm Post count: 0]

#12558 Reply |

Any update on this?

[DrokKeymaster February 13, 2017 at 10:17 am Post count: 2971]

#12670 Reply |

Hello Arne Steinarson,
We are terribly sorry for response in delay.
It’s a pity we can’t enter the link you send us.
We wonder if you have followed the steps below.
1. Long press the “SET” button for 5 seconds to enter the main menu settings,
2. press ” + or – ” to switching between P0-P5,then press “SET” to set the value.
Is that what you have done?
Best regards.

[Arne Steinarson February 14, 2017 at 2:53 pm Post count: 0]

#12711 Reply |

Hello,

Yes, I press SET for 5 seconds, it shows P0 then. However, on pressing SET again, it just jumps to the temp limit value (it should give me hysteres).

If I try to go to go to P1 for example: I press SET for 5 seconds, it shows P0 then. I press + to go to P1. But it goes to temp limit value. So I cannot scroll through the menu.

The last problem is that although the “cold” diod is lit, the cold relay does not appear to flip.

Best Regards
Arne S.

[Author]

Posts