Forum Replies Created
-
AuthorPosts
-
in reply to: Drok 2203 buck dc 8-22v/1-15v adjustments. #84215
Hello,
Do you only turn it clockwise ? That is to increase output voltage. Please turn it anticlockwise until preset value is lower than input voltage.
Best regards.
Hello Noel Ong,
To check what wrong it is, would you like to show operation details by video so that we can find out the cause?
If you need to revise AH and FU value, please do that before charging battery.
Best regards.
in reply to: JS-C33 Accuracy #84147Hello Bjorski,
Please check if it is this item, https://www.amazon.com/dp/B07759SLYP?ref=myi_title_dp&th=1
It calculates capacity percentage by monitoring battery voltage. F4 is for 12.8v LFP battery, if your battery type meet that, it should show correct percentage. Or please choose custom setting, menu “3–“.
Best regards.
in reply to: Ammeter 50A #84146Hello Zardiw,
We just received your email and responsed. Please check it.
in reply to: Boost component with isolated ports #84145Hello,
Sorry, for now we don’t have isolated converter.
Hello Bjorski,
Did you post this in the wrong area? We can’t find your question. What kind of issue do you have?
in reply to: Drok 2203 buck dc 8-22v/1-15v adjustments. #84142Hello Jim Young,
Is it this item? https://www.amazon.com/dp/B00C0KL1OM?ref=myi_title_dp&th=1
How large is the output voltage now? And did you turn it clockwise?
Best regards.
- This reply was modified 3 years, 1 month ago by Drok.
Hello,
Please confirm if it is this item,#200219, https://www.amazon.ca/dp/B01MZIAJI0?ref=myi_title_dp
The capacity percentage =(actual charging or discharging capacity /preset AH value)*100%
It can only work when you set OAH (over-capacity protection).
OAH setting: Press button Up or Down to move yellow cursor to OAH, then hold the OK button to enter parameters setting. After setting, please press OK to save setting.
Best regards,
DROK
Hello Randy,
Please confirm if it is this item, https://www.amazon.com/dp/B07YWVCBRN?ref=myi_title_dp
You can put any cable through current sensor. If current follows the direction of arrow on sensor,it is discharging status, capacity will decrease. Otherwise,capacity will increase.
Best regards,
DROK
in reply to: Custom dc power supply #83859in reply to: Custom dc power supply #83852Hello Afif Rakhman,
If quantity is small, factory need to charge development fees. So if you just order one or two, the cost is very high. Would you like to pay it?
Best regards,
DROK
Hello fred,
Please refer to rated battery voltage instead of battery cell quantity. In this program , one cell of lithium iron phosphate is 3.2v, assume your battery is 12v, you can select “F4″(3.2V*4) in menu”1–“.
If there is no suitable battery specification in menu 1, please program menu “3–“, custom setting.
For more deails, please refer to instruction, https://m.media-amazon.com/images/I/911LJfacaVL.pdf
Best regards,
DROK
in reply to: Reconnect to VAC8010F main module #83773Hello,Did you find available channel in “SFH”?If you have two items, please power on one module and display only, then search communication channel in SFH. There are value 0 -128, please find out which SFH value can make it displays voltage. At last, just choose that value in “FCH” menu.Best regards.in reply to: AC to DC Power Supply #83750Hello,
Would you like to offer product link or ASIN number so that we can confirm which one it is?
And is it possible for you to show us how it is by video? For example, wiring, input voltage/current.
You can send video to service@droking.com.
Best regards,
DROK
in reply to: wire diagram #83749Hello Brandon H,
Please check if it is this one, https://www.amazon.com/dp/B07B4CWKRJ?ref=myi_title_dp
Do you mean the 3p connector for measuring voltage and power supply?
Best regards,
-
AuthorPosts