Forum Replies Created
-
AuthorPosts
-
in reply to: 12V DC Voltage Met…Sensor Probe #3562
Hello Greg,
Thank you for purchasing.
The red wire is connected to the power supply+ (DC 7-30V); the black wire is connected to the power supply- (DC 7-30V) and the green wire is connected to measure voltage+ (DC 0-200V).
The button on the left which is marked “M” is to switch to display time, temperature, voltage.
The button on the right which is marked “S” is for time setting.
Here is the PDF file for the product.Instruction_B00E7OF820
Hope this will be helpful to you.
Best regardsin reply to: Pinouts for L298 Arduino Shield #3556Hello Michael,
Thank you for purchasing.
Here is the graphic illustration of the pinouts of the product.
Hope this will be helpful to you.
Best regardsin reply to: panel meter #3554Hello mike dunlap,
Thank you for writing in.
If you need two Voltage and Ampere Dual Multimeters, here is the suggestion for you: Dual Display DC Digital Multimeter Voltage Ampere Meter LCD Digital Display Voltmeter Current Meter with Shunt Volt Meter DC0-199.9V Amp Meter 0-19.99A for Battery Chargers Electric Vehicles
If you need a voltmeter and a ammeter, here is the link:
Voltmeter: DROK® Green LED 0.56″ Digital Display Voltmeter Car Battery Gauge DC 0-199.9V Voltage Measurement
Ammeter: DROK® 0.36″ Digital Ammeter DC Current Monitor LED Display DC 0-10A Ampere Panel Meter
If this is suitable for you, you can buy it from Amazon.
Hope this will be helpful to you.
Best regardsin reply to: DC DC converter #3550Hello Rodrigo,
Thank you for your patience and cooperation.
As your description, the relay is connected to the output of the product.
Therefore, the frequency at which this switching square wave do not affect the normal operation of the circuit.
Hope this can help you.
Best regardsin reply to: Pinouts for L298 Arduino Shield #3549Hello Tyler,
Thank you for writing in.
We are sorry that we do not have a sample code for 1 stepper motor.
Beg your understanding and if you have any questions, please feel free to contact us.
Best regardsin reply to: Connector name/specs #3548Hello Mike Berger,
Thank you for writing in.
The definition of the connector which is on the back of the module is 5V 5V GND GND GND 12V 12V.
Here is the photo
Hope this will be helpful to you.
Best regardsin reply to: emails and help #3546Hello troy,
Thank you for purchasing. We are sorry for any trouble caused on you.
Could you please tell us your order ID or the ASIN of the product you purchased?
With your help, we can find a solution more effectively.
Thanksin reply to: DC DC converter #3541Hello Rodrigo,
Thank you for writing in.
Could you please tell us the frequency of the square wave?
And is the square wave connected to the input of the product?
Waiting for your reply.
Thanksin reply to: TDA8920 Subwoofer amplifier voltage #3539Hello Maziva,
We are glad that this is helpful to you.
If you have any questions,please feel free to contact us, we are always here to assist you.
Best regardsin reply to: Wiring Ammeter Dual #3538Hello Mike,
Could you please tell us the ASIN of the product you are referring to?
ThanksHello Rick,
Could you please tell us the ASIN of the product you are referring to?
With your help, we can find a solution more effectively.
Thanksin reply to: DC Multimeter wiring #3534Hello Goetz,
Could you please tell us the ASIN of the product you are referring to?
With your help, we can find a solution more effectively.
Thanksin reply to: Missleading Advertising #3533Hello Richard,
Thank you for purchasing. We are sorry for any trouble caused on you.
This meter comes with a shunt. If your package do not come with a shunt, there are maybe mistakes during delivery.
Could you please send us an email (service at droking dot com) to tell us your order ID.
It is better that you can send us a photo in the email so that we can make sure whether wrong item was sent or not.
With your help, we can find a solution more effectively.
Beg your understanding.
Best regardsin reply to: DROK® Motor Speed Control Driver Board 10V-60V 10A #3520Hello Mike,
We have contacted you via Amazon, please pay attention to it.
Thanksin reply to: TDA8920 Subwoofer amplifier voltage #3519Hello Maziva,
Thank you for writing in.
The power supply you are thinking to buy is NOT suitable for this product.
Here is some reference examples for you:
AC 110/220V DC 24V 5A Regulated Double Output Switch Power Supply
AC 110V/220V to DC 24V 15A 360W Voltage Transformer Switch Power Supply for Led Strip
The power supply which has 200W output power will be better.
Hope this will be helpful to you.
Best regards -
AuthorPosts