Forum Replies Created
-
AuthorPosts
-
in reply to: DROK® Motor Speed Control Driver Board 10V-60V 10A #3336
Hello Mike,
There are two yellow self-recover fuses inside the module. Your problem may be caused by the over-temperature protection.
Could you open the metal shell and find out the four tin points which are marked by yellow frame in the attached picture. Then connect the four tin points by soldering as the attached picture below. By the way of this, the fuse will not work. If you still want the protection function, you can connect the four tin points by a 5-6A fuse.
Hope this will be helpful to you.
If you have any questions, please feel free to contact us.
Best regardsin reply to: longer probe with thermometer needed #3251Hello Patrick,
Could you please send email to service at droking dot com to tell us more details of how you operate the item, such as the input voltage/current, measuring temperature range, the wiring. It’s better that you can send us some photos of installation together.
We will consult your problem to our technician and give a solution as soon as possible.
Beg your understanding.
Best regardsin reply to: 24v to 12v converter, power consumption? #3250Hello Mike,
Could you please tell us your order ID or the ASIN of the product so that we can ensure what product you are referring to and find a solution for you?
ThanksHello Ziad,
According to Conservation of energy, if the input is 3.6V 90mA, the module will not boost the values to 5V 2A. This module cannot amplify power.
Hope this will be helpful to you.
Best regardsHello, Javier,
Here is the link of the datasheet of the product you referring to (ASIN: B00C9UUFHC)Datasheet_B00C9UUFHC
Hope this will be helpful to you.
Best regardsin reply to: DROK® TPA3116 Digital Power Amplifier Board 12-24V #3150Hi Jimbo213Mo,
Thank you for your suggest, this is DIY product, we will make it better and better.
Here is answer for your questions.
Q1. 5V / 150-200mA for bluetooth receiver
Q2. When the power supply is over 12V/3A, please use 4 Ω/15-30W for left and right speaker; When the power supply is over 19V/3-4A, please use 4 Ω/30-50W for left and right speaker;If you need a high power, we suggest that you should use a power supply with over 20-24V/4-5A and use 4Ω/40-80W for left and right speaker.
Q3. 2 soldering points of S1 open(desoldered), 2 soldering points of S2-6 need to be soldered.
Q4.There are no differences between left and right speaker when you set it mono.
Hope this will help you.
More questions, please feel free to write back.
Best regardsin reply to: Wiring Ammeter Dual #3149Hi Edward,
Long wires will do nothing to measuring voltage but will influence the accuracy of current reading.
Hope this will help you.
Best regardsin reply to: Wiring Ammeter Dual #3148Hi Chuck Neville,
Could you please see the Amazon page you sent us, there are several wiring diagrams.
Hope this will help you.
Best regardsin reply to: Wiring Ammeter Dual #3147Hi Albert David,
Sorry for missing your inquiry.
Here is the wiring diagram for you.
Hope this will help you.
Best regardsin reply to: adjust voltage output LM2596 #3138hello Doug Petty,
Could you please let us know what your order ID is or the Asin of the item is?
We will find solution for you. We just want to know more information about this item.
Hope you can understand.
Best regardsin reply to: back light on but no read out #3137Dear Dennis,
This meter need extra power supply.
See the following picture.
You have to connect this meter with power supply and your measure side.
Hope this will help you.
If this can’t help you, please feel free to contact us.
Best regardsin reply to: LED Chip how to power and wire #3126Dear Don,
Thanks for your inquiry.
We are sorry to let you know that we have many converter but we don’t have any DC converter can work for 10w LED grow light chips.
Sorry for any inconvenience may cause on you.
Hope you can understand.
Best regardsin reply to: droc relay #3125Dear mat,
Thanks for your inquiry.
Here is a wiring guide may help you check your connection.
If you item got some problem, you can send email to droking at service dot com.
We are willing to give every our customer best care.
Best regards
in reply to: 5 wire panel meter, 0-50v, 0-300A w/shunt. #3123Dear Ivan,
Here is wiring diagrams for 300A Digital DC Panel Ammeter.
Hope they will help you.
Best regardsin reply to: voltage Regulator #3111Dear Thomas Griffith,
Thanks for your inquiry.
Yes, it can work as a LED light driver.
Please make sure the voltage and ampere range is the on you need.
More questions, please feel free to write back.
Hope this can help you.
Best regards -
AuthorPosts